"The Exception To The Rule"

Hot Oil Filtration Systems
Benefits of Sidestream Hot Oil Filtration


Hot Oil Filtration Systems

Hot oils degrade by thermal cracking and oxidation. The two by-products of oil degradation is sludge and coke due to carbon build-up. These products can collect through-out your system but specifically in pump seals and internals, valves, etc. that result in equipment problems and possibly eventual system breakdown. The continuous contaminant build-up without proper filtration can also be detrimental to heating surfaces of your system, thereby reducing heat transfer efficiency.

The other important factor to consider is additional cost entailed from more rapid hot oil breakdown. This can include not only increased hot oil replacement but higher labor man-hours due to increase maintenance and repair time and the cost of replacement parts such as seals, valves, rotors, and mag-drive canisters thereby costs can quickly become considerable.

For additional information on our new Hot Oil Filtration Systems or any of our Non-Toxic MultiTherm® Heat Transfer Fluids or product Fluid Analysis contact MultiTherm by calling 1-800-225-7440.


Filtration Benefits
Extend Service Life of the Hot Oil
Reduction of System Maintenance
Reduction of Wear & Tear on Seals
Improve Heat Transfer Efficiency
Reduces Sludge Build-up thereby Improving viscosity of fluid
Design for Operation up to 6500 F
Swing-bolt Lid for Easy Cartridge Change out
Improved Flow-rates/throughput due to reduced contamination build-up
Typical Unit Dimentions
Width: 36 inches
Diameter: 60 inches
Height: 48 inches
Available Cartridge Sizes
100—150 Micron
75 Micron
40 Micron
30 Micron
20 Micron
15 Micron
10 Micron